59
management server.
• Encryption ASIC Status—Indicates whether the ASIC encryption self tests for the controller
passed or failed. A failed status indicates that the controller is not encrypted.
• Encryption Critical Security Parameter NVRAM Status—Indicates whether the controller
successfully detected the critical security parameter NVRAM. A failed status means that the
controller is not encrypted.
The encryption settings for a Smart Array controller can be configured by using the Smart
Storage Administrator software.
Drive enclosures
This section provides the following information about the drive enclosures attached to a Smart
Array controller.
• Enclosure port and box numbers
• Status
• Drive Bays—The number of drive bays
• Serial Number
• Model
• Firmware Version
Some enclosures do not have all the listed properties, and some storage configurations do not
have drive enclosures.
Logical drives
When the Logical View option is selected, the following information is listed for the logical
drives attached to a Smart Array controller.
• Logical drive number
• Status
• Capacity
• Fault Tolerance
• Logical Drive Type
• Encryption Status
Logical drives must be configured through the Smart Storage Administrator software before they
can be displayed on this page.
Physical drives
The information listed in this section depends on whether the Logical View or Physical View
option is selected. In the Logical View, physical drives that are configured as part of an array are
listed. In the Physical View, all physical drives are listed.
When a physical drive has a Failed status, this status does not affect the overall storage health
status. Only logical drives affect the storage health status.
The following information is listed for the physical drives attached to a Smart Array controller:
• Physical drive port, box, and bay numbers
To Next Page
Loading...
Need help?
General