66
Obtaining the iLO firmware image file
You can download an iLO firmware image file and use it to update a single server or multiple
servers in an iLO Federation group.
The BIN file from the iLO Online ROM Flash Component is required for updating the iLO
firmware with the
Flash Firmware and Group Firmware Update features.
Procedure
1. Navigate to the following website: http://www.nec.com/express/.
2. To locate and download the iLO Online ROM Flash Component file, follow the onscreen
instructions.
Download a Windows or Linux component.
3. Extract the BIN file.
• For Windows components: Double-click the downloaded file, and then click the Extract
button. Select a location for the extracted files, and then click OK.
• For Linux components: Depending on the file format, enter one of the following
commands:
◦ #sh ./CP00XXXX.scexe –unpack=/tmp/
◦ #rpm2cpio <firmware_file_name>.rpm | cpio -id
The name of the iLO firmware image file is similar to iLO 5_<yyy>.bin, where <yyy>
represents the firmware version.
To Next Page
Loading...
