87
3. Enter the following information:
• Group Name—The group name, which can be 1 to 31 characters long.
• Group Key—The group password, which can be from the configured minimum
password length to 31 characters long.
• Group Key Confirm—Confirm the group password.
If you enter the name and key for an existing group, the local iLO system is added to that
group. If you enter the name and key for a group that does not exist, the group is created
and the local iLO system is added to the new group.
4. Select from the following privileges:
• Login
• Remote Console
• Virtual Power and Reset
• Virtual Media
• Host BIOS
• Configure iLO Settings
• Administer User Accounts
• Host NIC
• Host Storage
• Recovery Set
The privileges granted to the group by the local iLO system control the tasks that users of
other iLO systems in the group can perform on the managed server.
5. Click Join Group.
To Next Page
Loading...
Need help?
General