88
Editing iLO Federation group memberships
Prerequisites
Configure iLO Settings privilege
Procedure
1. Click iLO Federation in the navigation tree.
The Setup tab displays the existing group memberships for the local iLO system.
2. Select a group membership, and then click Edit.
3. To change the group name, enter a new name in the Group Name box.
The group name can be 1 to 31 characters long.
4. To change the group key, select the Change Group Key check box, then enter a new value in
the Group Key and Group Key Confirm boxes.
The group key can be from the configured minimum password length to 31 characters long.
5. Select or clear the check boxes for the privileges you want to update.
The privileges granted to the group by the local iLO system control the tasks that users of
other iLO systems in the group can perform on the managed server.
6. For more information about the available privileges, see iLO Federation group privileges .
7. Click Update Group.
To Next Page
Loading...
Need help?
General