– 249 –
S-153 SPLIT CONNECTION RESTRICTION - ACD
12. This feature is available only for CCV Number or CCS Step assigned on ACDPLT. The other CCVs assigned
on “Jump CCV” or “Jump CCV step when the queue is busy” step in a CCV table are not supported.
13. Call forwarding of this feature is available among a maximum of 16 Splits.
14. When an intermediate party is released after Call Transfer-All Calls is restricted, the Calling Party is also dis-
connected.
15. When using QUEUE greater, LOGON less, READY less and WORKING-AGENTS greater of CCV instruc-
tions together with this feature, the result of logical operations (“AND”/”OR”) by using these CCV instructions
is always “TRUE”.
16. Do not set, change and delete the Special Logon ID from MIS client.
To Next Page
Loading...
