– 250 –
S-153 SPLIT CONNECTION RESTRICTION - ACD
PROGRAMMING
STEP 1: ASYD, INDEX 873, Bit0 =1: Restriction on the connection of PPN/Pilot number.
STEP 2: ASYD, INDEX 873, Bit1 =1: Restriction on the connection of Monitor.
STEP 3: ASFC, SFI 227, RES=1: Restriction on the connection of PPN/Pilot number.
STEP 4: ASFC, SFI 228, RES=1: Restriction on the connection of Monitor.
STEP 5: ACDLOG - Assign the ID code to logon
LID: (9 digits at the maximum)
Note: The Special Logon ID is fixed to 9 digits.
<Example > If Company Code = “555”, enter “0” for unused 6 digits. Thus the Special Logon ID
=”555000000”.
To Next Page
Loading...
