NEC UX5000 - Page 104

One-TouchCalling
Page-98
Abbreviated Dialing
To program a bin for Abbreviated Dialing:
1. CALL1+855.
2. Dialthebinnumber(1-9,0)youwanttoprogram.
3. Dial# 2tostoreaCommonAbbreviatedDialingnumber.
OR
Dial# 4tostoreaGroupAbbreviatedDialingnumber.
4. DialAbbreviatedDialingnumberstoragecode(e.g.,001)+HOLD.
5. Enterthenameassociatedwiththekeyyouareprogramming(seeNameStoringonpage90)+HOLD.
6. SPKtohangup.
Central Office Calls, Placing (Trunk Calling)
To program a bin for trunk calling:
1. CALL1+855.
2. Dialthebinnumber(1-9,0)youwanttoprogram.
3. Dialgeneraltrunkaccesscode(9).
OR
DialSpecificTrunkServiceCode(#9)plusthetrunknumber(e.g.,005).
OR
DialTrunkGroupServiceCode(804)plusthetrunkgroupnumber(e.g.,1).
4. Dialnumberyouwanttostore+
HOLD.
Thetotalofthedigitsstoredinsteps3and4cannotexceed24.
Validentriesare0-9,#and*.Toenterapause,pressMIC.TostoreaFlash,pressFLASH.
5. Enterthenameassociatedwiththekeyyouareprogramming(seeNameStoringonpage90)+HOLD.
6. SPKtohangup.