NEC UX5000 - Page 105

One-TouchCalling
Page-99
Service Codes
To assign a Service Code to a bin:
Thisletsyoumakeyourownsetofone-touchfeaturekeys.
1. CALL1+855.
2. Dialthebinnumber(1-9,0)youwanttoprogram.
3. DialServiceCodeyouwantstored+HOLD.
Forexample,ifyouwantaOne-TouchKeytoautomaticallyclearyourLastNumberRedial,
enter876.RefertothefeaturesinthishandbookfortheappropriateServiceCodes.
4. Enterthenameassociatedwiththekeyyouareprogramming+HOLD.
5. SPKtohangup.
Using a Bin Number
To dial a One-Touch bin:
1. CALL1(orliftthehandset).
2. Dial#7+binnumber(1-9,0).
Forone-touchoperationtothesefunctions,defineaProgrammableFunctionkey.Refertothe
operationonpage100.
Clearing a Bin Number
To clear a programmed One-Touch Key:
1. CALL1+855.
2. Enterthebinnumbertobecleared.
3. PressCLEAR.