NEC UX5000 - Page 106

One-TouchCalling
Page-100
Chaining Bin Numbers
To chain One-Touch Keys:
ThisoptioncanonlybeusedwhenProgrammableFunctionKeysaredefinedforOne-Touch
operation(PGM15-07orSC851:+01).Forprogramming,refertopage100.
1. PressthefirstFUNCTION(One-TouchProgrammable)key.
Letthestoredfunctiondialout.
2. PressanotherFUNCTION(One-TouchProgrammable)key.
Thestoreddigitsdialout.
Programmable Function Keys
WhenusingProgrammableFunctionKeys,notethatnamescannotbestoredwiththekey
aswiththebinnumberoperationdocumentedonthepreviouspages.
To define a Programmable Function Key as a One-Touch Key:
1. CALL1+851.
2. Pressthekeytobedefined.
3. Dial01(DSS/One-TouchKeyOperation).
4. ForDirectStationSelection(Extension):
a.Dialextensionnumberyouwantassignedtothatkey+HOLD.
b.SPKtohangup.