NETGEAR Nighthawk D7000 - Configure WEP Legacy Wifi Security

•
Are you using the correct network name (SSID) and password?
Configure WEP Legacy WiFi Security
Wired Equivalent Privacy (WEP) security is a legacy authentication and data encryption mode that is
superseded by WPA-PSK and WPA2-PSK.WEP limits the WiFi transmission speed to 54 Mbps (the
modem router is capable of speeds of up 300 Mbps).
If you want to change the WiFi settings of the modem router’s main network, use a wired
connection to avoid being disconnected when the new WiFi settings take effect.
Tip
To configure WEP security:
1. Launch an Internet browser from a computer or WiFi device that is connected to the network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Enter the user name and password for the modem router.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
4. Click the OK button.
The BASIC Home page displays.
5. Select Wireless.
The Wireless Settings page displays.
6. From the Mode menu, select Up to 54 Mbps.
The page adjusts to display the WEP radio button.
7. In the Security Options section, select the WEP radio button.
Manage the WiFi Network Settings
112
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000