Name: NETGEAR Nighthawk D7000
Brand: NETGEAR
Rating: 4 (1 reviews)

To Next Page

To Previous Page

• The ISP configuration information for your DSL account

• ISP login name and password

• Fixed or static IP address settings (special deployment by ISP; this setting is rare)

If you cannot locate this information, ask your ISP to provide it.When your Internet connection is working,

you no longer need to launch the ISP login program on your computer to access the Internet. When you

start an Internet application, your modem router automatically logs you in.

Set Up Your Modem Router for DSL Service

You can install your modem router for DSL service or for cable or fiber (Ethernet WAN) service. If you

use a DSL modem, follow the procedure that is described in Cable the Modem Router for DSL Service

and Access the Modem Router on page 24. If you use a cable or fiber modem, follow the procedure that

is described in Set Up the Modem Router for Cable or Fiber Service on page 32.

DSL Service

Make sure that your ADSL or VDSL service is active before you install the modem router.You need the

following information to install your DSL modem and connect to the Internet:

• DSL user name and password.This information is included in the welcome letter your DSL ISP sent

you when you signed up for your service. Record your DSL Internet service account user name and

password.

• Your telephone number or DSL account number. If you do not use voice service, you can use your

DSL account number in place of a phone number.

If you do not know or cannot locate your DSL user name and password, call your DSL Internet service

provider (ISP). Be specific when speaking with your DSL Internet service provider. For example, you could

say, “I need my DSL service user name and password. Can you help me?”

If your provider says that they do not support NETGEAR services, tell them that you

need only your DSL user name and password.You do not need support.

Note

Cable the Modem Router for DSL Service and Access the

Modem Router

The following figure shows the cabling of your modem router for DSL service.

Install and Access the Modem Router and Its Network

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000

NETGEAR Nighthawk D7000 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1300 Mbit/s
USB version	3.2 Gen 1 (3.1 Gen 1)
Rack mounting	No
Bandwidth (first)	2.4 GHz
Bandwidth (second)	5 GHz
USB ports quantity	2
WLAN data transfer rates supported	600, 1300 Mbit/s
Memory card slot(s)	-
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	5
DSL specification	VDSL, VDSL2, ADSL, ADSL2, ADSL2+
Antennas quantity	3
Security algorithms	WPA, WPA2-PSK, WPS
Product type	Tabletop router
Product color	Black
Flash memory	128 MB
Internal memory	256 MB
Processor frequency	1000 MHz
Cables included	LAN (RJ-45)
Power source type	AC