DescriptionField
Enter the client identifier (client ID) string, as indicated by your
ISP.
Client Identifier String (option 61)
If your ISP did not provide you with a client ID string, leave this
field blank.
13. Click the Apply button.
Your settings are saved.
14. Click the Test button to test your Internet connection.
If the NETGEAR website does not display within one minute, see Troubleshoot the Internet Connection
on page 299.
Specify a VDSL Connection with a Login Requirement and
PPPoE Service
If you want to manually configure the VDSL connection settings, use the information that your ISP gave
you to log in and connect to your Internet service. If you cannot find this information, contact your ISP.
Entering incorrect information might prevent the modem router from connecting to the Internet.
The modem router provides a virtual Internet interface and a virtual IPTV interface. In most situations,
you only need to configure the Internet interface. If you use one or more IPTV devices, you might also
need to configure the IPTV interface. Follow the directions that your ISP gave you.
If you must configure the IPTV interface, first use the following procedure to configure
the Internet interface.Then, repeat the procedure to configure the IPTV interface.
Note
To view or specify the settings for a VDSL Internet connection that requires a login and uses a PPPoE
service:
1. Launch an Internet browser from a computer or WiFi device that is connected to the network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
4. Click the OK button.
Manage the Internet Settings Manually
68
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
