•
Specify an ADSL Connection with a Login Requirement and PPPoA or PPPoE Service on page 57
•
Specify a VDSL Connection with a Login Requirement and PPPoE Service on page 68
•
Specify a Cable or Fiber Connection with a Login Requirement and PPPoE Service on page 79
Reestablish the PPPoE or PPPoA Connection
If your PPPoE or PPPoA configuration information is correct (see Verify the PPPoE or PPPoA Connection
on page 302), your PPPoE or PPPoA connection is working.
To reconnect if your PPPoE or PPPoA connection does not function:
1. Launch an Internet browser from a computer or WiFi device that is connected to the network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Enter the user name and password for the modem router.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > ADVANCED Home.
The ADVANCED Home page displays.
6. In the Internet Port pane, click the Connection Status button.
The Connection Status page displays.
7. Click the Connect button.
The modem router attempts to reconnect.
If you cannot connect after several minutes, you might be using an incorrect service name, user name,
or password. Or your ISP might not be able to provide an Internet connection. For more information, see
one of the following sections:
• Specify an ADSL Connection with a Login Requirement and PPPoA or PPPoE Service on page 57
• Specify a VDSL Connection with a Login Requirement and PPPoE Service on page 68
• Specify a Cable or Fiber Connection with a Login Requirement and PPPoE Service on page 79
Unless you connect manually, the modem router does not authenticate using PPPoE
or PPPoA until data is transmitted to the network.
Note
Diagnostics and Troubleshooting
303
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
