•
To allow access from any IP address on the Internet, select the Everyone radio button.This radio
button is selected by default.
8. Specify the port number for accessing the web management interface.
The default is 8443, which is a common alternate for HTTPS. For greater security, enter a custom
port number for the remote web management interface. Choose a number from 1024 to 65535, but
do not use the number of any common service port.
9. Click the Apply button.
Your settings are saved.
Configure the Modem Router as a DSL Modem Only
By default, the modem router functions as both a modem and a router.You can change the operation
mode to a mode in which the modem router functions as a DSL modem only with the routing, firewall,
wireless support, and traffic meter features disabled.
A typical use of such a mode is when the modem router is used only for DSL connectivity behind a router,
firewall, or security device manager that provides routing, firewall, wireless support, and traffic meter
features.
To configure the modem router as a DSL modem only:
1. Launch an Internet browser from a computer or WiFi device that is connected to the network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Enter the user name and password for the modem router.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Device Mode.
The Device Mode page displays.
6. From the Device Mode menu, select Modem (Modem Only).
7. Click the Apply button.
Your settings are saved. The modem router restarts.
Manage the Modem Router and Monitor the Traffic
266
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
