7. Make sure that the Enable This Interface check box is selected for the virtual IPTV interface.
If you already enabled and configured the virtual IPTV interface, the check box is selected.
8. Select the Bridge Mode check box.
By default, the LAN 4 port is bound to the virtual IPTV interface and the Enable IPTV on LAN4 check
box is automatically selected.
9. If you also connected an IPTV device to the LAN 3 port, select the Enable IPTV on LAN3 check box.
10. If you also connected an IPTV device to the LAN 2 port, select the Enable IPTV on LAN2 check box.
11. Click the Apply button.
Your settings are saved.
Manage the WAN Security Settings
The WAN security settings include port scan protection and denial of service (DoS) protection, which can
protect your LAN against attacks such as Syn flood, Smurf Attack, Ping of Death, and many others. By
default, DoS protection is enabled and a port scan is rejected.
You can also enable the modem router to respond to a ping to its WAN (Internet) port.This feature allows
your modem router to be discovered. Enable this feature only as a diagnostic tool or if a specific reason
exists.
Manage the WAN and LAN Network Settings
216
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
