This check box is selected by default.
7. Specify the range of IP addresses that the modem router assigns:
• In the Single/Start IP Address field, enter the lowest number in the range.
This IP address must be in the same subnet as the modem router. By default, the starting IP
address is 192.168.0.2.
• In the Finish IP Address field, enter the number at the end of the range of IP addresses.
This IP address must be in the same subnet as the modem router. By default, the ending IP address
is 192.168.0.254.
8. Click the Apply button.
Your settings are saved.
Disable the Built-In DHCP Server
By default, the modem router functions as a DHCP server. The modem router assigns IP, DNS server,
and default gateway addresses to all devices connected to the LAN.The assigned default gateway address
is the LAN address of the modem router.
You can use another device on your network as the DHCP server or specify the network settings of all
your computers.
If you disable the DHCP server and no other DHCP server is available on your
network, you must set your computer IP addresses manually so that they can access
the modem router.
Note
To disable the built-in DHCP server:
1. Launch an Internet browser from a computer or WiFi device that is connected to the network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Enter the user name and password for the modem router.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > Setup > LAN Setup.
Manage the WAN and LAN Network Settings
227
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
