NETGEAR Nighthawk D7000 - Set up FTP Access through the Internet

To access devices from a remote computer:
1. Launch a web browser on a computer that is not on your home network.
2. Connect to your modem router on your home network:
•
To connect with Dynamic DNS, type the DNS name.
For more information about Dynamic DNS, see Set Up and Manage Dynamic DNS on page 193.
•
To connect without Dynamic DNS, type the modem router’s Internet port IP address.
You can view the modem router’s Internet IP address on the BASIC Home page.
Manage Dynamic DNS and Access Storage Devices Through the Internet
198
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000