The new rule is added to the Service Table on the Block Services page.
Add an Outbound Firewall Rule for a Custom Service or
Application
The modem router lists many default services and applications that you can use in outbound rules. If the
service or application is not predefined, you can specify a custom service or application in an outbound
rule.
To add an outbound firewall rule for a custom service or application:
1. Find out which protocol and port number or range of numbers the service or application uses.
You can usually find this information by contacting the publisher of the service or application or through
online user or news groups.
2. Launch an Internet browser from a computer or WiFi device that is connected to the network.
3. Type http://www.routerlogin.net.
A login window opens.
4. Enter the user name and password for the modem router.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
5. Click the OK button.
The BASIC Home page displays.
6. Select ADVANCED > Security > Block Services.
7. If this is the first time that you add an outbound firewall rule, in the Service Blocking section, specify
how the modem router applies outbound rules:
Control Access to the Internet
150
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
