c. Enter the MAC address of the computer or router with which you previously were able to connect
to the Internet.
You might find the MAC address on the product label of your device. Enter the MAC address
in the AABBCCDDEEFF format, not in the AA:BB:CC:DD:EE:FF format.
d. Click the Next button.
19. If the Congratulations! window still does not display and the modem router still does not connect to
the Internet, do the following:
a. Review all your settings and make sure that you selected the correct options and entered everything
correctly.
b. Run the Setup Wizard one more time.
c. Contact your ISP to verify that you are using the correct configuration information.
d. Read Troubleshoot the Internet Connection on page 299.
e. If problems persist, register your NETGEAR product and contact NETGEAR technical support.
Log In to the Modem Router After Setup to View or Change
Settings
After you set up the modem router for DSL, cable, or fiber service, you can view or change the settings
for the modem router by accessing NETGEAR genie.
To log in to the modem router:
1. Launch an Internet browser from a computer or WiFi device that is connected to the network.
2. Type http://www.routerlogin.net.
The nature of the login window that opens depends on your Internet browser.
Install and Access the Modem Router and Its Network
39
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
