6. Select the Turn Remote Management On check box.
7. In the Allow Remote Access By section, specify the external IP addresses to be allowed to access
the modem router’s remote management:
For enhanced security, restrict access to as few external IP addresses as practical.Note
Select one of the following radio buttons and configure the options accordingly:
•
To allow access from a single IP address on the Internet, select the Only This Computer radio
button. Enter the IP address to be allowed access.
•
To allow access from a range of IP addresses on the Internet, select the IP Address Range radio
button. Enter a beginning and ending IP address to define the allowed range.
•
To allow access from a list of IP addresses on the Internet, select the IP Address List radio button.
Enter up to 10 IP addresses to be allowed access.
Manage the Modem Router and Monitor the Traffic
265
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
