A table displays the detected device name, MAC address, and connection type of the devices that
are not connected and blocked from accessing the network.
7. To add a device to the blocked list, do the following:
a. Click the Add button.
The Add Blocked Device page displays.
b. Enter the MAC address and device name for the device that you want to block.
c. On the Add Blocked Device page, click the Apply button.
The device is added to the blocked list on the Access Control page.
8. To remove a device from blocked list, do the following:
a. Select the check box for the device.
b. Click the Delete button.
The device is removed from the blocked list.
9. Click the Apply button.
Control Access to the Internet
142
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
