EasyManuals Logo

NETGEAR Nighthawk D7000 User Manual

NETGEAR Nighthawk D7000
313 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #158 background imageLoading...
Page #158 background image
DescriptionField
If your outgoing email server requires authentication, select
this check box and specify the following settings:
My mail server requires authentication
•
In the User Name field, enter the user name for the
outgoing email server.
•
In the Password field, enter the password for the outgoing
email server.
Send Alert Immediately
Select this check box to enable the modem router to send an
email alert when it detects a denial of service (DoS) attack.
If a DoS attack is detected
Select this check box to enable the modem router to send an
email alert when it detects a port scan.
If a Port Scan is detected
By default, this check box is selected and email alerts are
sent immediately when someone attempts to visit a blocked
site.
When someone attempts to visit a
blocked site
Send logs according to this schedule
To send logs based on a schedule, select one of the following options from the menu:
•
When log is full.This is the default selection.
•
Hourly. Logs are sent every hour.
•
Daily. Logs are sent every day. From the Time menu, specify the time of day, and select the am
or pm radio button.
•
Weekly. Logs are sent every week. From the Day menu, select the day. From the Time menu,
specify the time of day, and select the am or pm radio button.
If you do not want logs to be sent at all, select None from the menu.
8. Click the Apply button.
Your settings are saved.
Logs are sent automatically. If the log fills before the specified time, it is sent. After the log is sent, it
is cleared from the modem router memory. If the modem router cannot email the log and the log buffer
fills, the modem router overwrites the log.
Control Access to the Internet
158
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000

Table of Contents

Other manuals for NETGEAR Nighthawk D7000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk D7000 and is the answer not in the manual?

NETGEAR Nighthawk D7000 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1300 Mbit/s
USB version3.2 Gen 1 (3.1 Gen 1)
Rack mountingNo
Bandwidth (first)2.4 GHz
Bandwidth (second)5 GHz
USB ports quantity2
WLAN data transfer rates supported600, 1300 Mbit/s
Memory card slot(s)-
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports5
DSL specificationVDSL, VDSL2, ADSL, ADSL2, ADSL2+
Antennas quantity3
Security algorithmsWPA, WPA2-PSK, WPS
Product typeTabletop router
Product colorBlack
Flash memory128 MB
Internal memory256 MB
Processor frequency1000 MHz
Cables includedLAN (RJ-45)
Power source typeAC
Weight and Dimensions IconWeight and Dimensions
Depth185 mm
Width285 mm
Height50 mm
Weight750 g

Related product manuals