NETGEAR Nighthawk D7000 User Manual

If you use applications such as multiplayer gaming, peer-to-peer connections, or real-time communications
such as instant messaging or remote assistance, keep UPnP enabled, which it is by default.
To manage Universal Plug and Play:
1. Launch an Internet browser from a computer or WiFi device that is connected to the network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Enter the user name and password for the modem router.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > UPnP.
The UPnP page displays.
6. Select the Turn UPnP On check box.
By default, this check box is selected.You can disable or enable UPnP for automatic device
configuration. If the Turn UPnP On check box is cleared, the modem router does not allow any device
to automatically control router resources, such as port forwarding.
7. Enter the advertisement period in minutes.
The advertisement period specifies how often the modem router broadcasts its UPnP information.
This value can range from 1 to 1440 minutes. The default period is 30 minutes. Shorter durations
ensure that control points detect current device status at the expense of more network traffic. Longer
durations can compromise the freshness of the device status but can significantly reduce network
traffic.
8. Enter the advertisement time to live in hops.
The time to live for the advertisement is measured in hops (steps) for each UPnP packet sent. Hops
are the steps a packet takes between routers. The number of hops can range from 1 to 255.The
default value for the advertisement time to live is 4 hops, which should be fine for most home networks.
If you notice that some devices are not being updated or reached correctly, it might be necessary to
increase this value.
9. Click the Apply button.
The UPnP Portmap Table displays the IP address of each UPnP device that is accessing the modem
router and which ports (internal and external) that device opened.The UPnP Portmap Table also
displays what type of port is open and whether that port is still active for each IP address.
10. To refresh the information in the UPnP Portmap table, click the Refresh button.
Optimize Performance
172
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000

NETGEAR Nighthawk D7000 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1300 Mbit/s
USB version	3.2 Gen 1 (3.1 Gen 1)
Rack mounting	No
Bandwidth (first)	2.4 GHz
Bandwidth (second)	5 GHz
USB ports quantity	2
WLAN data transfer rates supported	600, 1300 Mbit/s
Memory card slot(s)	-
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	5
DSL specification	VDSL, VDSL2, ADSL, ADSL2, ADSL2+
Antennas quantity	3
Security algorithms	WPA, WPA2-PSK, WPS
Product type	Tabletop router
Product color	Black
Flash memory	128 MB
Internal memory	256 MB
Processor frequency	1000 MHz
Cables included	LAN (RJ-45)
Power source type	AC

Weight and Dimensions

Depth	185 mm
Width	285 mm
Height	50 mm
Weight	750 g