NETGEAR Nighthawk D7000 User Manual

By default, the name is WORKGROUP. The name works only in an operating system that supports
NetBIOS, such as Microsoft Windows. If you are using a Windows workgroup rather than a domain,
the workgroup name is displayed here.
9. Enable or disable access methods by selecting or clearing the corresponding check boxes and
specifying access to the storage device as described in the following table.
DescriptionAccess
Method
Enabled by default.You can type \\readyshare to access the storage device within
your network. If you change the name in the Network/Device Name field from
readyshare to another name, the link changes accordingly.
Network
Connection
Enabled by default.You can type http://readyshare.routerlogin.net/shares to
access the USB device within your network and download or upload files. In this
HTTP
URL, readyshare is the name that is specified in the Network/Device Name field.
If you change the name in the Network/Device Name field from readyshare to
another name, the link changes accordingly.
You can also click the link that is shown in the Link column.The fixed port is number
is 80.
Disabled by default. If you enable this feature, remote users can type https://<public
IP address>/<shares> to access the USB device over the Internet. <public IP
HTTPS (via
internet)
address> is the external or public IP address that is assigned to the modem router
(for example, 1.1.10.102).
This feature supports file uploading only.The default port is number 443, which you
can change.
Enabled by default.You can type ftp://readyshare.routerlogin.net/shares to access
the USB device within your network and download or upload files. In this URL,
FTP
readyshare is the name that is specified in the Network/Device Name field. If you
change the name in the Network/Device Name field from readyshare to another
name, the link changes accordingly.
You can also click the link that is shown in the Link column.The fixed port is number
is 21.
Disabled by default. If you enable this feature, remote users can type ftp://<public
IP address>/shares to access the USB device over the Internet and download or
FTP (via
internet)
upload files.<public IP address> is the external or public IP address that is assigned
to the modem router (for example, 1.1.10.102).
The default port is number 21, which you can change.
Share a Storage Device
181
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000

NETGEAR Nighthawk D7000 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1300 Mbit/s
USB version	3.2 Gen 1 (3.1 Gen 1)
Rack mounting	No
Bandwidth (first)	2.4 GHz
Bandwidth (second)	5 GHz
USB ports quantity	2
WLAN data transfer rates supported	600, 1300 Mbit/s
Memory card slot(s)	-
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	5
DSL specification	VDSL, VDSL2, ADSL, ADSL2, ADSL2+
Antennas quantity	3
Security algorithms	WPA, WPA2-PSK, WPS
Product type	Tabletop router
Product color	Black
Flash memory	128 MB
Internal memory	256 MB
Processor frequency	1000 MHz
Cables included	LAN (RJ-45)
Power source type	AC

Weight and Dimensions

Depth	185 mm
Width	285 mm
Height	50 mm
Weight	750 g