EasyManuals Logo

NETGEAR Nighthawk D7000 User Manual

NETGEAR Nighthawk D7000
313 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
DescriptionField
•
Always On. Once the Internet connection is established, it
remains active.This is the default setting.
•
Dial on Demand. When someone attempts to connect to the
Internet, the Internet connection is established. When the idle
time-out period expires, the Internet connection is terminated.
•
Manually Connect.You must connect to the Internet manually
(see View or Change a TCP/IP Internet Connection on page 249
or View or Change a PPPoE or PPPoA Internet Connection on
page 250).
If you select Dial on Demand from the Connection Mode menu,
enter the idle time-out period in minutes.
Idle Timeout (minutes)
The idle time-out specifies how long the modem router keeps the
Internet connection active when no one on the network is using the
Internet connection.The default is 5 minutes. To disable the idle
time-out, enter 0. (When you disable the idle time-out, the connection
is not terminated automatically).
Internet IP Address or IPTV IP Address (depending on your selection in Step 8)
Your ISP uses DHCP to assign your IP address.Your ISP
automatically assigns these addresses.
Get Dynamically from ISP
Enter the IP address, IP subnet mask, and gateway IP address that
your ISP assigned you for static IP address service.The gateway is
the ISP router to which your modem router connects.
Use Static IP Address
Domain Name Server (DNS) Address
The DNS server is used to look up site addresses based on their domain names.
Your ISP uses DHCP to assign your DNS servers.Your ISP
automatically assigns this address.
Get Automatically from ISP
If you know that your ISP does not automatically transmit DNS
addresses to the modem router during login, select this option and
Use These DNS Servers
enter the IP address of your ISP primary DNS server. If a secondary
DNS server address is available, enter it also.
NAT (Network Address Translation)
Manage the Internet Settings Manually
72
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000

Table of Contents

Other manuals for NETGEAR Nighthawk D7000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk D7000 and is the answer not in the manual?

NETGEAR Nighthawk D7000 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1300 Mbit/s
USB version3.2 Gen 1 (3.1 Gen 1)
Rack mountingNo
Bandwidth (first)2.4 GHz
Bandwidth (second)5 GHz
USB ports quantity2
WLAN data transfer rates supported600, 1300 Mbit/s
Memory card slot(s)-
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports5
DSL specificationVDSL, VDSL2, ADSL, ADSL2, ADSL2+
Antennas quantity3
Security algorithmsWPA, WPA2-PSK, WPS
Product typeTabletop router
Product colorBlack
Flash memory128 MB
Internal memory256 MB
Processor frequency1000 MHz
Cables includedLAN (RJ-45)
Power source typeAC
Weight and Dimensions IconWeight and Dimensions
Depth185 mm
Width285 mm
Height50 mm
Weight750 g

Related product manuals