Nikon ECLIPSE Ti2-U - Power Switch; AC Adapter and Power Cord

Chapter 1 Names of Parts and Their Functions
13
1.3.3 Power Switch
This power switch is for the Ti2-U main body. For details on the procedure for turning on the power, see "3.1
Power-related Operation."
Close the shutter
before opening the cover
of the filter cube slot.
C
Power switch (for the Ti2-U main body)
1.3.4 AC Adapter and Power Cord
The AC adapter and the power cord are used to supply power to the Ti2-U main body.
AC adapter and power cord
About the AC adapter and power cord
• Be sure to use the AC adapter supplied with this product. (For details on the AC adapter, see “Chapter 8
Specifications.”)
• Be sure to use only the power cord specified in “Chapter 8 Specifications” when connecting the AC
adapter to the AC power.
Power switch
(
☞
3.1)
Powe
r
-on indicato
r