J
James HarrellAug 20, 2025
What does 'Check Ink Ribbon' mean on my Nisca PR-C101?
- KKelly SchmidtAug 20, 2025
The 'Check Ink Ribbon' message on your Nisca Printer means you should change to a normal Ink Ribbon Cartridge.
To Next PageTo Next PageWhat does 'Check Ink Ribbon' mean on my Nisca PR-C101?
The 'Check Ink Ribbon' message on your Nisca Printer means you should change to a normal Ink Ribbon Cartridge.
What to do if my Nisca PR-C101 displays 'Card Jam XX-XX'?
If your Nisca Printer is displaying a 'Card Jam XX-XX' error, press the CLEAR Key. If card jams occur frequently, the Card Transport Roller may be dirty. Clean the Card Transport Roller, and if it's excessively dirty, continue cleaning with a new Cleaning Card.
What does 'Feed Miss XX-XX' mean on my Nisca Printer and how to fix it?
The 'Feed Miss XX-XX' error on your Nisca Printer indicates that cards cannot be fed into the printer. Press the CLEAR Key. Frequent occurrences of this error may mean the Card Case is not loaded correctly, so ensure it is. Also, check that the Card Case weight is lowered. If the issue persists, the Feeding Roller might be dirty; clean it.
What to do if my Nisca PR-C101 Printer displays 'Card Empty XX-XX'?
If your Nisca Printer displays the 'Card Empty XX-XX' error, it means there are no more cards in the printer. Load cards into the printer.
What to do if my Nisca PR-C101 displays 'MG Write XX-XX' error?
If your Nisca Printer shows the 'MG Write XX-XX' error, it means writing to the magnetic strip failed. Press the CLEAR Key. This may mean the card is not set in the correct direction. Check the loading direction of the cards.
What to do if my Nisca PR-C101 Printer displays 'MG Read XX-XX' error?
If your Nisca Printer displays the 'MG Read XX-XX' error, it means reading of the magnetic data failed. Press the CLEAR Key. This may mean the card is not set in the correct direction. Check the loading direction of the cards. Also, make sure there are no scratches or dirt on the card's magnetic strip; remove any dirt. You cannot use cards with scratches on the magnetic strip.
Why does my Nisca PR-C101 Printer say 'Rbn End XX-XX'?
The 'Rbn End XX-XX' error on your Nisca Printer indicates that the ink ribbon has been used up. Change the Ink Ribbon Cartridge.
What does 'Service C. XX-XX' mean on my Nisca PR-C101 Printer?
The 'Service C. XX-XX' error on your Nisca Printer indicates an error that requires repairs. You can try to turn the power off and on, or hold down the CLEAR Key for 3 seconds to reset the printer. If the error reoccurs, repairs are necessary.
How to fix 'Rbn Wind XX-XX' error on Nisca PR-C101?
The 'Rbn Wind XX-XX' error on your Nisca Printer means the ink ribbon could not be wound correctly. Reload the Ink Ribbon Cartridge.
How to fix 'Rbn Type XX-XX' error on Nisca PR-C101 Printer?
The 'Rbn Type XX-XX' error on your Nisca Printer indicates that ink ribbon position control has failed. Reload the Ink Ribbon Cartridge.
General| Print Technology | Dye-Sublimation |
|---|---|
| Print Resolution | 300 dpi |
| Card Capacity (Input) | 100 cards |
| Card Capacity (Output) | 30 cards |
| Card Size | CR-80 (85.6mm x 54mm / 3.375" x 2.125") |
| Connectivity | USB |
| Operating System Compatibility | Windows XP/Vista/7 |
Identifies and describes the components on the front of the printer.
Identifies and describes the components on the rear of the printer.
Details the interior components accessible via the front cover.
Explains the indicators and keys on the printer's control panel.
Provides instructions for powering the printer on and off safely.
Explains how to load cards into the printer for printing.
Describes the procedure for manual card feeding.
Guides users through the process of printing a card from application software.
Details how to safely remove printed cards from the printer.
Instructs on replacing the ink ribbon cartridge when it runs out.
Explains the procedure to switch the printer from Normal Mode to User Mode.
Covers navigation and basic operations within the printer's User Mode.
How to set up and use the reprint function for recently printed cards.
Instructions for checking card counts and total sides printed.
How to check the remaining amount and details of the ink ribbon cartridge.
Details on how to adjust print quality, including color tones.
How to check program versions, serial numbers, and manage settings.
Procedure for using a cleaning card to maintain print quality.
Steps to clean the printer's cleaning roller for optimal performance.
Guide on cleaning the feeding roller to ensure smooth card feeding.
How to diagnose and clear errors indicated by the printer.
Procedure for removing jammed cards from the printer.
Solutions for problems like missing colors or incorrect prints.
Addresses issues like power or data connectivity problems.
Lists available ink ribbon cartridges and their specifications.
Information on recommended card types and specifications.
Guide on how to update the printer's firmware and drivers.
