Basic System Configuration Guide Boot Options
Edition: 01 3HE 11010 AAAC TQZZA 183
autonegotiate
Syntax [no] autonegotiate
Context bof
Description This command enables speed and duplex autonegotiation on the CSM Management port in
the running configuration and the Boot Option File (BOF).
When autonegotiation is enabled, the link attempts to automatically negotiate the link speed
and duplex parameters. If autonegotiation is enabled, then the configured duplex and speed
parameters are ignored.
The no form of the command disables the autonegotiate feature on this port.
Default autonegotiate
auto-discover
Syntax [no] auto-discover [id client-identifier] [vlan vlan-id]
[no] auto-discover
Context bof
Description This command enables ADP as part of the boot-up sequence by adding an ADP keyword to
the BOF file. ADP will run the next time the chassis is rebooted. You can also use this
command to specify an optional unique identifier to use in the automatic discovery broadcast.
You can use any unique identifier of up to 16 characters. If you specify mac, the chassis MAC
address is used. If you run ADP with 802.1q encapsulation, you can specify the VLAN ID.
Parameters client-identifier — indicates the unique system identifier to use in the auto-discovery
broadcast. If you use mac as the client identifier, the chassis MAC address is used.
Values any combination of up to 16 alphanumeric characters with no spaces
vlan-id — indicates the VLAN ID for ADP with 802.1q encapsulation
Values 0 to 4094
duplex
Syntax duplex {full | half}
Context bof
Description This command configures the duplex mode of the CSM Management port when
autonegotiation is disabled in the running configuration and the Boot Option File (BOF).
This configuration command allows for the configuration of the duplex mode of the CSM
Management port. If the port is configured to autonegotiate, this parameter will be ignored.
To Next Page
Loading...
