QoS and QoS Policies
112
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
3.5.5 Configurable Network Ingress Shaping to Fabric
Configuring network ingress shapers to the fabric is similar to configuring access
ingress shapers to the fabric.
The ingress to-fabric shapers are user-configurable. For the 7705 SAR-8 and the
7705 SAR-18, the maximum rate depends on a number of factors, including platform,
chassis variant, and slot type. See Configurable Ingress Shaping to Fabric (Access
and Network) for details.
For information about fabric shapers on the 7705 SAR-M, 7705 SAR-H,
7705 SAR-Hc, 7705 SAR-A, 7705 SAR-Ax, 7705 SAR-W, and 7705 SAR-Wx, see
Fabric Shaping on the Fixed Platforms (Access and Network). The 7705 SAR-X does
not support configurable network ingress shapers.
3.5.6 Network Fabric Shaping on the Fixed Platforms
The 7705 SAR-A, 7705 SAR-Ax, 7705 SAR-M, 7705 SAR-H,
7705 SAR-Hc,7705 SAR-W, and 7705 SAR-Wx support user-configurable fabric
shapers at rates of up to 5 Gb/s for access ingress traffic and network ingress traffic.
On the 7705 SAR-A, 7705 SAR-Ax, 7705 SAR-M, 7705 SAR-H, 7705 SAR-Hc,
7705 SAR-W, and 7705 SAR-Wx, network ingress shapers to the fabric operate
similarly to access ingress shapers to the fabric. The 7705 SAR-X does not support
configurable network ingress shapers. See Fabric Shaping on the Fixed Platforms
(Access and Network) for more information.
To Next Page
Loading...
