Nokia 7705 - 5.2.3.2 Network Ports

Quality of Service Guide Network Queue QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 219
mda 4
mda-type a16-chds1
network
ingress
queue-policy "NQ1"
exit
exit
exit
----------------------------------------------
*A:ALU-1>config>card#
Use the following CLI syntax to apply a network queue policy to the add/drop port. A
network queue policy for an add/drop port applies to traffic flowing from the bridging
domain to the IP domain (that is, from the add/drop port to the v-port).
Example: config# card 1
config>card# mda 8
config>card>mda# network ring
config>card>mda>network>ring# add-drop-port-queue-
policy “adp_queue_policy”
The following output displays the configuration for a network queue policy applied to
the add/drop port.
*A:7705custDoc:Sar18>config>card>mda>network# info detail
----------------------------------------------
ingress
fabric-policy 1
queue-policy "default"
exit
ring
qos-policy 5
add-drop-port-queue-policy "adp_queue_policy"
exit
----------------------------------------------
*A:7705custDoc:Sar18>config>card>mda>network#
5.2.3.2 Network Ports
Use the following CLI syntax to apply network queue policy NQ1 to a network port.
CLI Syntax: config>port#
ethernet
network
queue-policy name
Example: ALU-1# config# port 1/1/1
config>port# ethernet
config>port>ethernet# network