QoS Shapers and Shaper QoS Policies
438
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
10.2.2.3 Viewing Shaper Policy Information
Use the show>qos>shaper-policy command to view information on a shaper
policy, its shaper groups (including the unshaped SAP shaper group), the PIR and
CIR values, and where the policy is used.
*A:ALU>show qos shaper-policy “test_shaper_policy” detail
===============================================================================
QoS Shaper Policy
===============================================================================
-------------------------------------------------------------------------------
Shaper Policy (test_shaper_policy)
-------------------------------------------------------------------------------
Policy : test_shaper_policy
Description : (Not Specified)
Unshaped Sap Shaper Group : unshaperd_sg1
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Shaper Group Name PIR (Kbps) CIR (Kbps)
-------------------------------------------------------------------------------
default max 0
test_sg1 999000 555000
unshaperd_sg1 888000 444000
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Policy Associations
-------------------------------------------------------------------------------
Object Type Object Id Direction
-------------------------------------------------------------------------------
MDA 1/1 access ingress
MDA 1/2 access ingress
MDA 1/5 access ingress
Port 1/2/1 access egress
Port 1/5/8 network egress
-------------------------------------------------------------------------------
===============================================================================
*A:ALU>show qos shaper-policy “test_shaper_policy” detail#
To Next Page
Loading...
