Nokia 7705 - 6.2.2.2 IES and VPRN Services

Quality of Service Guide Service Egress and Ingress QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 273
The following output displays an Epipe service configuration with service ingress
policy 100 and service egress policy 105 applied to the SAP.
ALU-1>config>service# info
#--------------------------------------------------
echo "QoS Policy Configuration"
#--------------------------------------------------
...
epipe 6 customer 6 vpn 6 create
description "Distributed Epipe service to west coast"
sap 1/1/10:0 create
ingress
qos 100
exit
egress
qos 105
exit
exit
spoke-sdp 2:6 create
ingress
vc-label 6298
exit
egress
vc-label 6300
exit
exit
no shutdown
exit
...
#--------------------------------------------------
ALU-1>config>service#
6.2.2.2 IES and VPRN Services
Applying QoS policies is done in the same way for service ingress and service egress
IES and VPRN SAPs. The following example shows how to apply QoS policies to IES
SAPs. Use the policy ID number or name to identify the policy.
CLI Syntax: config>service>ies service-id customer customer-id
interface ip-interface-name
sap sap-id
egress
qos policy-id
ingress
qos policy-id
The output examples for IES and VPRN services are similar to the example given
previously for an Epipe service configuration.