Nokia 7705 - 6.2.2 Applying Service Egress and Ingress Policies; 6.2.2.1 VLL and VPLS Services

Service Egress and Ingress QoS Policies
272
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
6.2.2 Applying Service Egress and Ingress Policies
Apply service egress and ingress policies to the following service SAPs:
• VLL services
− Epipe
− Cpipe
− Apipe
− Apipe SAPs that are members of a VCC SAP aggregation group
− Fpipe
− Hpipe
− Ipipe
• VPLS
•IES
• VPRN
Refer to the 7705 SAR Services Guide, “Service Overview”, for information about
configuring service parameters.
6.2.2.1 VLL and VPLS Services
Applying QoS policies is done in the same way for service ingress and service egress
VPLS and VLL SAPs. The following example shows how to apply QoS policies to
Epipe SAPs. Use the policy ID number or name to identify the policy.
CLI Syntax: config>service>epipe service-id customer customer-id
sap sap-id
egress
qos policy-id
ingress
qos policy-id