Service Egress and Ingress QoS Policies
282
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
 
6.4.1.1 Service Egress QoS Policy Configuration Commands
config
—qos
— [no] sap-egress policy-id [create] 
— description description-string 
—no description
— [no] fc fc-name [create] 
— dot1p {dot1p-value | in-profile dot1p-value out-profile dot1p-value)
—no dot1p
— dscp dscp-name
— dscp in-profile dscp-name out-profile dscp-name
—no dscp
— queue queue-id
—no queue
— packet-byte-offset [add bytes | subtract bytes | none]
—no packet-byte-offset 
— policy-name policy-name 
—no policy-name 
— queue queue-id [queue-type] [create
] 
—no queue queue-id
— adaptation-rule [pir adaptation-rule] [cir adaptation-rule]
—no adaptation-rule
— cbs {size-in-kbytes | default}
—no cbs 
— high-prio-only percent
—no high-prio-only 
— mbs size [bytes | kilobytes]
—no mbs
— packet-byte-offset [add bytes | subtract bytes | none]
—no packet-byte-offset 
— rate pir-rate [cir cir-rate]
—no rate
— slope-policy name
—no slope-policy 
— scope {exclusive | template}
—no scope