Nokia 7705 - 10.4.2.3 Show Commands

QoS Shapers and Shaper QoS Policies
458
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
10.4.2.3 Show Commands
shaper-policy
Syntax shaper-policy [shaper-policy-name] [detail]
Context show>qos
Description This command displays shaper policy information.
Parameters shaper-policy-name — the name of the shaper policy
detail — displays detailed information about the shaper policy
Output The following output is an example of shaper policy information, and Table 67 describes the
fields.
Output Example
*A:7705custDoc:Sar18>show>qos# shaper-policy
===============================================================================
Shaper Policies
===============================================================================
Policy-Id Description
-------------------------------------------------------------------------------
2
5
default Default Shaper QoS policy.
shaper_policy_1
shaper_policy_2
===============================================================================
*A:7705custDoc:Sar18>show>qos#
*A:7705:Dut-C# show qos shaper-policy 5
===============================================================================
QoS Shaper Policy
===============================================================================
-------------------------------------------------------------------------------
Shaper Policy (5)
-------------------------------------------------------------------------------
Policy : 5
Description : Description for Shaper Policy id # 5
-------------------------------------------------------------------------------
Shaper Group Name PIR CIR
-------------------------------------------------------------------------------
default max 0
===============================================================================
Note: The following command outputs are examples only; actual displays may differ
depending on supported functionality and user configuration.