Quality of Service Guide Slope QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 359
7.2.2 Applying Slope Policies
Slope policies are applied to network and access egress and ingress queues.
Use the following CLI syntax:
CLI Syntax: config>qos>network-queue>queue>slope-policy name
config>qos>sap-ingress>queue>slope-policy name
config>qos>sap-egress>queue>slope-policy name
7.2.3 Default Slope Policy Values
The default slope policies are identified as default. The default policies cannot be
edited or deleted. Table 50 displays the default slope policy parameters.
Table 50 Slope Policy Defaults
Field Default
description “Default slope policy”
high-slope
shutdown shutdown
start-avg 70
max-avg 90
max-prob 80
low-slope
shutdown shutdown
start-avg 50
max-avg 75
max-prob 80
To Next Page
Loading...
