Nokia 7705 - 5.10.8 Configuring LDP Support for LDP-to-SR Stitching; 5.10.9 Enabling LDP Signaling and Services

Quality of Service Guide QoS Shapers and Shaper QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 439
10.2.3 Default Shaper QoS Policy Values
The default shaper policies are identified by the policy name “default”. The default
policies cannot be deleted. Table 65 displays the default shaper policy parameters.
The following output displays the default configuration:
A*A:ALU-1>config>qos# info detail
#--------------------------------------------------
echo "QoS Policy Configuration"
#--------------------------------------------------
...
shaper-policy "default" create
description "Default Shaper QoS policy."
shaper-group default create
description "Default Shaper Group."
rate max cir 0
exit
exit
...
#--------------------------------------------------
Table 65 Shaper Policy Defaults
Field Default
description “Default Shaper QoS policy.”
shaper-group “default”
description “Default Shaper Group.”
pir-rate max
cir-rate 0