Nokia 7705 - 5.2.3 Applying Network Queue QoS Policies; 5.2.3.1 Adapter Cards

Quality of Service Guide Network Queue QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 217
mbs 5
cbs 0.10
high-prio-only 10
slope-policy "default"
exit
queue 9 multipoint auto-expedite create
no avg-frame-overhead
rate 100 cir 0
adaptation-rule pir closest cir closest
mbs 5
cbs 0.10
high-prio-only 10
slope-policy "default"
exit
queue 10 multipoint auto-expedite create
no avg-frame-overhead
rate 100 cir 0
adaptation-rule pir closest cir closest
mbs 5
cbs 0.10
high-prio-only 10
slope-policy "default"
exit
fc be create
multicast-queue 9
queue 1
exit
fc h1 create
multicast-queue 10
queue 1
exit
----------------------------------------------
ALU-1>config>qos>network-queue#
5.2.3 Applying Network Queue QoS Policies
Apply network queue policies to the following entities:
• Adapter Cards
• Network Ports
5.2.3.1 Adapter Cards
Use the following CLI syntax to apply a network queue policy to any adapter card
network ingress port or v-port on a ring adapter card. Use the ring command to apply
a network queue policy to a ring add/drop port. You cannot assign a network queue
policy to an add/drop port while the policy is referenced by a non-ring port, and vice-
versa.