Nokia 7705 - 5.3 Service Management Tasks; 5.3.1 Deleting QoS Policies; 5.3.2 Copying and Overwriting QoS Policies

Quality of Service Guide Network Queue QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 227
5.3 Service Management Tasks
This section describes the following service management tasks:
• Deleting QoS Policies
• Copying and Overwriting QoS Policies
• Editing QoS Policies
5.3.1 Deleting QoS Policies
A network queue policy is associated by default with adapter card network ingress
ports. You can replace the default policy with a customer-configured policy, but you
cannot entirely remove a QoS policy. When you remove a QoS policy, the policy
association reverts to the default network-queue policy default.
Use the following CLI syntax to delete a network queue policy.
CLI Syntax: config>qos# no network-queue policy-name
Example: config>qos# no network-queue NQ1
5.3.2 Copying and Overwriting QoS Policies
You can copy an existing network queue policy, rename it with a new policy ID name,
or overwrite an existing network queue policy. The overwrite option must be
specified or an error occurs if the destination policy ID exists.
Use the following CLI syntax to overwrite an existing network queue policy.
CLI Syntax: config>qos# copy network-queue source-policy-id
dest-policy-id [overwrite]
Example: A:ALU-1>config>qos# copy network-queue NQ1 NQ2 overwrite
config>qos# exit
*A:ALU-1#