Service Egress and Ingress QoS Policies
258
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
6.1 Overview
There is one default policy for service ingress and one default policy for service
egress and MC-MLPPP SAP egress. Each policy can have up to eight ingress
queues and eight egress queues per service. The default policies can be copied and
modified but they cannot be deleted. The default policies are identified as policy ID 1.
The eight ingress queues can be designated as a unicast, broadcast, multicast, or
unknown queue for the purposes of FC-to-queue mapping.
The default policies are applied to the appropriate interface, by default. For example,
the default service ingress policy is applied to access ingress SAPs. The default
service egress policy is applied to access egress SAPs and MC-MLPPP egress
SAPs. You must explicitly associate other QoS policies.
For information about the tasks and commands necessary to access the command
line interface and to configure and maintain the 7705 SAR, refer to the
7705 SAR Basic System Configuration Guide, “CLI Usage”.
Note: Throughout this guide, the terms service ingress/egress and access ingress/egress
are interchangeable. This section (Service Egress and Ingress QoS Policies) uses the term
service ingress/egress.
To Next Page
Loading...
