Nokia 7705 - 4.3.3 Editing QoS Policies

Network QoS Policies
172
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
The following output displays copied policies:
ALU-12>config>qos# info detail
---------------------------------------------
...
network 1 create
description "Default network QoS policy."
scope template
ingress
default-action fc be profile out
...
network 600 create
description "Default network QoS policy."
scope template
ingress
default-action fc be profile out
...
network 700 create
description "Default network QoS policy."
scope template
ingress
default-action fc be profile out
...
---------------------------------------------
ALU-12>config>qos#
4.3.3 Editing QoS Policies
You can change existing policies, except the default policies, and entries in the CLI.
The changes are applied immediately to all interfaces where the policy is applied. To
prevent configuration errors, use the copy command to make a duplicate of the
original policy in a work area, make the edits, and then overwrite the original policy.