Quality of Service Guide Service Egress and Ingress QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 325
6.4.2.3 Show Commands
sap-egress
Syntax sap-egress [policy-id] [standard | mc-mlppp] [association | match-criteria | detail]
Context show>qos
Description This command displays service egress and MC-MLPPP SAP egress QoS policy information.
Parameters policy-id — displays information about the specific policy ID
Values 1 to 65535, or policy-name (up to 64 characters)
Default all service egress policies
standard — displays all standard SAP egress QoS policies
mc-mlppp — displays only MC-MLPPP SAP egress policy information
association — displays policy associations
match-criteria — displays match criteria
detail — displays detailed policy information including policy associations
Output The following output is an example of service egress and MC-MLPPP SAP egress QoS policy
information, and Table 47 describes the fields.
Output Example
*A:ALU-1# show qos sap-egress
===============================================================================
Sap Egress Policies
===============================================================================
Policy-Id Type Scope Description
-------------------------------------------------------------------------------
1 Default Template Default SAP egress QoS policy.
200 Standard Template SAP Egress Policy 200
300 MC-MLPPP Template SAP Egress Policy 300
400 Standard Exclusive Egress Policy 400
500 Standard Template Egress Policy 500
550 MC-MLPPP Template New Multi-class type policy
600 Standard Exclusive
===============================================================================
*A:ALU-1#
*A:ALU-1# show qos sap-egress 500 detail
===============================================================================
Note: The following command outputs are examples only; actual displays may differ
depending on supported functionality and user configuration.
To Next Page
Loading...
