Network Queue QoS Policies
252
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
5.4.2.2 Operational Commands
copy
Syntax copy network-queue src-name dst-name [overwrite]
Context config>qos
Description This command copies or overwrites existing network queue QoS policies to another network
queue policy ID.
The copy command is a configuration level maintenance tool used to create new policies
using existing policies. It also allows bulk modifications to an existing policy with the use of
the overwrite keyword.
Parameters network-queue src-name dst-name — indicates that the source policy ID and the
destination policy ID are network-queue policy IDs. Specify the source policy ID that
the copy command will attempt to copy from and specify the destination policy ID to
which the command will copy a duplicate of the policy.
overwrite — specifies that the existing destination policy is to be replaced. Everything in
the existing destination policy will be overwritten with the contents of the source
policy. If overwrite is not specified, a message is generated saying that the
destination policy ID exists.
SAR12>config>qos# copy network-queue nq1 nq2
MINOR: CLI Destination "nq2" exists - use {overwrite}.
SAR12>config>qos# copy network-queue nq1 nq2 overwrite
To Next Page
Loading...
