Quality of Service Guide Network Queue QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 251
Parameters queue-id — an existing multipoint queue defined in the config>qos>network-queue
context.
Values 9 to 16
Default 9
queue
Syntax queue queue-id
no queue
Context config>qos>network-queue>fc
Description This command enables the context to configure forwarding-class-to-queue mappings.
The no form of this command removes the queue-id from the network-queue policy and from
any existing network ingress or network egress ports using the policy, and sets the queue-id
back to the default queue (queue 1).
Parameters queue-id — the queue identifier for the queue, expressed as an integer. The queue-id
uniquely identifies the queue within the policy. This is a required parameter each time
the queue command is executed.
Values 1 to 8
Default 1
To Next Page
Loading...
