QoS Fabric Profiles
416
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
9.3.1.1 Configuration Commands
The config>qos>fabric-profile command applies only to the 7705 SAR-8 and
7705 SAR-18; it does not apply to the fixed platforms. The config>system>qos
command applies only to the fixed platforms, with the exception of the 7705 SAR-X.
The 7705 SAR-X does not support fabric aggregate rate configuration; its shaper
rate is set permanently to 16 Gb/s.
config
—qos
— fabric-profile policy-id [aggregate-mode | destination-mode] [create]
—no fabric-profile policy-id
— aggregate-rate aggregate-rate [unshaped-sap-cir cir-rate]
— description description-string
—no description
— dest-mda [slot/mda | multipoint]
— rate mda-rate
— system
—qos
— access-ingress-aggregate-rate access-ingress-aggregate-rate [unshaped-
sap-cir cir-rate]
— network-ingress-aggregate-rate network-ingress-aggregate-rate
9.3.1.2 Operational Commands
config
—qos
— copy fabric-profile src-prof dst-prof [overwrite]
9.3.1.3 Show Commands
The show>qos>fabric-profile command applies only to the 7705 SAR-8 and
7705 SAR-18; it does not apply to the fixed platforms. The show>system>qos
command applies only to the fixed platforms, with the exception of the 7705 SAR-X.
The 7705 SAR-X does not support fabric aggregate rate configuration; its shaper
rate is set permanently to 16 Gb/s.
show
—qos
— fabric-profile policy-id [association | detail]
show
— system
— qos
To Next Page
Loading...
