QoS Fabric Profiles
422
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
1 to 10000000 (10 000 000), or max for the 7705 SAR-8 Shelf V2
with CSMv2 (slots 1 and 2)
1 to 1000000 (1 000 000) or 1 to 2500000 ((2 500 000), or max for
the 7705 SAR-18 (12 MDA slots)
1 to 10000000 (10 000 000), or max for the 7705 SAR-18
(4 XMDA slots)
dest-mda
Syntax dest-mda [slot/mda | multipoint]
Context config>qos>fabric-profile
Description This command enables the context for setting the rate for per-destination mode shapers on
a specific adapter card or all adapter cards. Using the slot/mda parameter specifies a
particular destination adapter card. Using the multipoint keyword specifies that all adapter
cards are destination cards and they will have their rate configured to the same value. The
value of the rate is configured using the rate command.
Parameters slot/mda — the slot and mda identifier of the adapter card
Values slot:1
mda:1 to 6 on the 7705 SAR-8, 1 to 12 on the 7705 SAR-18
multipoint — specifies that all adapter cards are destination adapter cards
rate
Syntax rate mda-rate
Context config>qos>fabric-profile>dest-mda
Description This command sets the rate of the fabric shapers in per-destination mode, in kb/s. When the
multipoint keyword is used in the dest-mda command, rate sets the bandwidth available to
multipoint traffic through the fabric shapers; all adapter card shapers are set to the same
value.
Using the default keyword sets the rate to 200 000 kb/s.
Default 200000 (“default”)
Parameters mda-rate — the rate of the fabric shapers in destination mode, in kb/s. Using the default
keyword sets the mda-rate to 200 000 kb/s.
Values 1 to 1000000 (1 000 000), or default for the 7705 SAR-8 with
CSMv2
1 to 2500000 (2 500 000), or default for the 7705 SAR-8 Shelf V2
with CSMv2 (all 6 slots)
To Next Page
Loading...
