Nokia 7705 - 6.2.3.2 Service Ingress Policy Defaults

Quality of Service Guide Service Egress and Ingress QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 275
6.2.3.2 Service Ingress Policy Defaults
The following output shows the service ingress policy defaults.
ALU-1>config>qos>info detail
#--------------------------------------------------
#--------------------------------------------------
echo "QoS Policy Configuration"
#--------------------------------------------------
...
sap-ingress 1 create
policy-name "default"
description "Default SAP ingress QoS policy."
scope template
queue 1 priority-mode auto-expedite create
adaptation-rule pir closest cir closest
rate max cir 0
mbs default
cbs default
high-prio-only default
slope-policy "default"
exit
default-fc "be"
default-priority low
exit
...
#--------------------------------------------------
rate pir = max, cir = 0
cbs default (8 kbytes for 512 byte buffer size, 18 kbytes
for 2304 byte buffer size)
mbs default (180 kbytes)
high-prio-only default (10%)
slope-policy default
Table 44 Service Egress Policy Defaults (Continued)
Field Default