Nokia 7705 - 6.3.2 Copying and Overwriting QoS Policies

Quality of Service Guide Service Egress and Ingress QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 279
6.3.2 Copying and Overwriting QoS Policies
You can copy an existing service egress or ingress policy, rename it with a new policy
ID value, or overwrite an existing policy ID. The overwrite option must be specified
or an error occurs if the destination policy ID exists.
Use the following syntax to overwrite an existing QoS policy ID:
CLI Syntax: config>qos> copy sap-ingress source-policy-id
dest-policy-id overwrite
Example: config>qos# copy sap-ingress 100 200
config>qos# copy sap-ingress 200 101
MINOR: CLI Destination "101" exists use {overwrite}
config>qos# copy sap-ingress 200 101 overwrite
config>qos#
The following output displays the copied policies:
ALU-1>config>qos# info
---------------------------------------------
...
exit
sap-ingress 100 create
description "Used on VPN sap"
queue 1 create
exit
rate 11000
exit
...
sap-ingress 101 create
description "Used on VPN sap"
queue 1 create
exit
rate 11000
exit
sap-ingress 200 create
description "Used on VPN sap"
queue 1 create
exit
rate 11000
exit
...
---------------------------------------------
ALU-1>config>qos#