Network Queue QoS Policies
214
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
 
5.1 Overview
Network queue policies define the network queuing characteristics on the network 
adapter cards.
There is one default network queue policy. Each policy can have up to 16 ingress 
queues (8 unicast and 8 multipoint). The default policies cannot be deleted but can 
be copied and the copy can be modified. The default policies are identified as 
network-queue “default”.
Default network queue policies are applied to adapter card network ingress ports at 
the adapter card level, and to network egress ports at the port level. You must 
explicitly create and then associate other network queue QoS policies. 
For information about the tasks and commands necessary to access the command 
line interface and to configure and maintain the 7705 SAR, refer to the 
7705 SAR Basic System Configuration Guide, “CLI Usage”.