Quality of Service Guide Slope QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 361
7.3 Service Management Tasks
This section describes the following service management tasks:
• Deleting QoS Policies
• Copying and Overwriting QoS Policies
• Editing QoS Policies
7.3.1 Deleting QoS Policies
A QoS policy cannot be deleted until it is removed from a network or access egress/
ingress queue. Use the following CLI syntax:
CLI Syntax: config>qos>network-queue>queue>no slope-policy
config>qos>sap-ingress>queue>no slope-policy
config>qos>sap-egress>queue>no slope-policy
7.3.1.1 Removing a Policy from the QoS Configuration
Use the following CLI syntax to delete a slope policy:
CLI Syntax: config>qos# no slope-policy name
Example: config>qos# no slope-policy SlopePolicy1
7.3.2 Copying and Overwriting QoS Policies
You can copy an existing slope policy, rename it with a new policy ID value, or
overwrite an existing policy ID. The overwrite option must be specified or an error
occurs if the destination policy ID exists.
Use the following syntax to overwrite an existing QoS slope policy.
CLI Syntax: config>qos> copy slope-policy source-policy-name
dest-policy-name [overwrite]
To Next Page
Loading...
